An important part of home designing is the installation of flooring. If flooring styles and designs are not selected with care, the end results could be inferior and one would have to spend more time, money and effort in reinstalling the floor. Therefore, one should be clear about what he or she wants from the flooring before contacting manufacturers and flooring installers. Here are a few common flooring styles that can be used depending upon the manufacturer’s recommendation and working budget.
Hardwood Flooring Style One of the most popular flooring materials for installation tips is hardwood floors as they can be quite expensive. They have a natural warmth and look and can also withstand different levels of foot traffic. Also, the cost can fluctuate greatly depending upon the quality and type of wood. Some manufacturers will sell you hardwood floors constructed using real wood and others will install it using engineered hardwood floors.
Planks With No Grouting Board This installation tip focuses on using solid plywood sheets that are nailed and stuck together using a grout and sash. Manufacturers recommend using a tongue-and-groove nailing system where each nail is centered in the plywood and the boards are glued across the nails. For this very reason, this method will offer a long term savings as the grout lines will not need to be replaced after years of use.
Starting Wall to Wall The starting wall of an engineered wood flooring planks should be flat and smooth. It is best to start on one side of the room and build up the other side in the same manner. A standard installation pattern will work perfectly. For those beginning with an unfinished project, it is best to start with a 2 inch trim. Also, installing a plywood sheet over the beginning wall will give the engineered flooring more stability.
Concrete Flooring Installation in Shawnee, Kansas Starting with a clean, uncluttered surface will make the entire process easier and less prone to mistakes. Before any concrete flooring installation is complete, the starting wall should be flat and clean. When the concrete has been poured, the area between the concrete slab and the floor should be sealed by polyethylene sheet to prevent moisture from penetrating into the flooring. If you choose to use engineered flooring installation over concrete, make sure to use an epoxy resin that will prevent water damage from the poured concrete.
Shaping the Flooring After the flooring is installed, it should be measured to ensure proper spacing. The following tips will help you ensure the best possible flooring installation by choosing the right floor planks and spacing the planks correctly. Most home improvement stores carry a variety of different sized planks in stock. Flooring companies can also offer assistance with finding the right planks for your space. If you have questions about the installation of flooring or need help choosing a particular color, ask the flooring company you are working with for assistance.